P-SAR 2010 Header
Tuesday, March 16, 2010
7:30 AM to 2:30 PM 
Tuesday, March 16, 2010
  Registration
7:30 AM - 8:30 AM
Continental Breakfast
8:30 AM to 11:00 AM 
Tuesday, March 16, 2010
  Plenary Session
Session Chair: Mr Brian Runyon - USAF AFRL/RZTS
8:30 AM - 8:45 AM
Opening Remarks
Presenter: Mr Brian Runyon - USAF AFRL/RZTS
8:45 AM - 9:30 AM Mr Anthony Cifone View Bio
Keynote
Presenter: Mr Anthony Cifone - NAVAIR 4.4
9:30 AM - 10:15 AM Dr Dale Carlson View Bio
Technical Keynote
Presenter: Dr Dale Carlson - GE Aviation
10:15 AM - 10:30 AM
Program Overview: Army Perspective
Presenter: Dr Virginia Young - US Army AMRDEC
10:30 AM - 10:45 AM
Program Overview: Air Force Perspective
Presenter: Col Paul Waugh - USAF
10:45 AM - 11:00 AM
P-SAR Overview
Presenter: Ms Kathleen Sargent - USAF AFRL/RZTS
11:00 AM to 12:30 PM 
Tuesday, March 16, 2010
  Group Luncheon - Masters Ballroom

12:30 PM to 2:30 PM
Concurrent Sessions
Tuesday, March 16, 2010
  Session 1: Cold Section Durability
Session Chair: Mr Ravi Ravindranath - NAVAIR
12:30 PM - 1:00 PM
The Development of a Graded Erosion Protected B4C/C Damping Coating for Titanium Alloy Compressor Components
Presenter: Dr Frank Lemkey - Phygen Coatings Inc
Authors: Prof Boris Movchan - Internation Ctr for Electron Beam Technology, Dr Kostyantyn Yakovchuk - Internation Ctr for Electron Beam Technology
1:00 PM - 1:30 PM
Free Layer Blade Damper by Multifunctional Damping Coatings
Presenter: Dr Herman Shen - HAE Inc
1:30 PM - 2:00 PM
Active Vibration Reduction of Titanium Alloy Fan Blades Using Piezoelectric Materials
Presenter: Dr Benjamin Choi - NASA GRC
Authors: Dr Kirsten Duffy - The University of Toledo, Mr Jeffrey Kauffman - The Pennsylvania State University, Mr Andrew Provenza - NASA GRC
2:00 PM - 2:30 PM
Computational Simulation of Nonsyncronous Turbomachinery Vibrations
Presenter: Dr Scott Sawyer - University of Akron
Author: Mr Joseph Granger - University of Akron
12:30 PM to 2:30 PM
Concurrent Sessions
Tuesday, March 16, 2010
  Session 2: Materials and Manufacturing
Session Chair: Mr Jay Jira - USAF AFRL/RXLM
12:30 PM - 1:00 PM
Three-dimensional Analysis of Dissipated Energy in Fatigue Crack Growth
Presenter: Mr Casey Davis - The University of Tulsa
Authors: Dr Jeremy Daily - The University of Tulsa, Mr Casey Davis - The University of Tulsa
1:00 PM - 1:30 PM
Analysis of Strain Energy Behavior throughout a Fatigue Process
Presenter: Dr Onome Scott-Emuakpor - USAF AFRL/RZTS
Authors: Dr Charles Cross - USAF AFRL/RZTS, Dr Tommy George - USAF AFRL/RZTS, Dr Mo-How Shen - The Ohio State University
1:30 PM - 2:00 PM
An Energy Based Experimental-Analytical Torsional Fatigue Life Prediction Method
Presenter: Dr Onome Scott-Emuakpor - USAF AFRL/RZTS
Authors: Dr Charles Cross - USAF AFRL/RZTS, Dr Tommy George - USAF AFRL/RZTS, Dr Onome Scott-Emuakpor - USAF AFRL/RZTS, Mr John Wertz - The Ohio State University
2:00 PM - 2:30 PM
The Role of Microtexture on Fatigue Lifetime Variability and Crack Initiation Mechanisms
Presenter: Dr Christopher Szczepanski - UTC
Authors: Dr James Larsen - USAF AFRL, Dr S Semiatin - USAF AFRL
12:30 PM to 2:30 PM
Concurrent Sessions
Tuesday, March 16, 2010
  Session 3: Prognostics & Health Management
Session Chair: Mr Kevin Kerner - Army/Aviation Applied Technology Directorate
12:30 PM - 1:00 PM
Automated Characterization of Turbomachinery Response Dynamics Using Non-Contact (NSMS) and On-the-Blade (Strain-Gage) Sensors
Presenter: Mr Eric Schenck - Hood-Impact Systems
Authors: Mr Avinash Sarlashkar - Hood-Impact Systems, Mr Eric Schenck - Impact Technologies LLC, Mr Peter Tappert - Hood-Impact Systems, Dr Andy Von Flotow - Hood Technology Corp
1:00 PM - 1:30 PM
Development and Validation of Frequency Domain NSMS
Presenter: Mr John Jagodnik - Mechanical Solutions Inc
Authors: Mr Ben Fisher - Mechanical Solutions Inc, Mr John Jagodnik - Mechanical Solutions Inc, Mr Michael Platt - Mechanical Solutions Inc
1:30 PM - 2:00 PM
Joint Time Frequency Vibration Diagnostics and Usage-based Prognostics of Turbine Engine Accessories
Presenter: Mr Gregory Kacprzynski - Impact Technologies LLC
Authors: Mr Carl Byington - Impact Technologies LLC, Mr Gregory Kacprzynski - Impact Technologies LLC, Mr Jeremy Sheldon - Impact Technologies LLC
Wednesday, March 17, 2010
7:00 AM to 2:30 PM 
Wednesday, March 17, 2010
  Registration
7:00 AM - 7:30 AM
Continental Breakfast
7:30 AM to 9:30 AM
Concurrent Sessions
Wednesday, March 17, 2010
  Session 4: GUIDE IV
Session Chair: Dr David Johnston - USAF AFRL/RZTS
7:30 AM - 8:00 AM
Recent Advancements in Reduced Order Modeling of a Bladed Rotor with Geometric Mistuning
Presenter: Prof Alok Sinha - The Pennsylvania State University
Authors: Mr Yasharth Bhartiya - The Pennsylvania State University, Prof Alok Sinha - The Pennsylvania State University
8:00 AM - 8:30 AM
Fully Coupled Fluid-Structural Interaction of a Transonic Rotor at Near-Stall Condtions
Presenter: Mr Gecheng Zha - University of Miami
8:30 AM - 9:00 AM
Decreasing Bladed Disk Response with a Few Blade-to-Blade Dampers
Presenter: Prof Marc Mignolet - Arizona State University
Authors: Prof Marc Mignolet - Arizona State University, Mr Raghavendra Murthy - Arizona State University
9:00 AM - 9:30 AM
A Progress Report on Characterization of Unsteady Flow in Centrifugal Compressor Stages And Its implication on Forced Response on Impeller Blades
Presenter: Dr Choon Tan - MIT
7:30 AM to 9:30 AM
Concurrent Sessions
Wednesday, March 17, 2010
  Session 5: Electrical Power Systems INVENT
Session Chair: Mr Sean Field - NAVAIR
7:30 AM - 8:00 AM
Integrated Vehicle Energy Technology Program Overview
Presenter: Mr Miguel Maldonado - USAF AFRL/RZPA
Author: Mr Miguel Maldonado - OSD DDR&E
8:00 AM - 8:30 AM
Emphasizing Robustness in Electrical Power Systems
Presenter: Mr Miguel Maldonado - USAF AFRL/RZPA
8:30 AM - 9:00 AM
Aircraft Gearbox Dynamics Subject to Electromechanical Actuator Regenerative Energy Flow
Presenter: Mr Matt Rutledge - Avetec
Authors: Ms Karleine Justice - Avetec, Mr Matt Rutledge - Avetec
9:00 AM - 9:30 AM
Current Trends and Convergent Technologies for Electric/Hybrid Vehicles and More Electric Aircraft Systems
Presenter: Dr Kaushik Rajashekara - Rolls-Royce
Author: Dr Kaushik Rajashekara - Rolls-Royce
7:30 AM to 9:30 AM
Concurrent Sessions
Wednesday, March 17, 2010
  Session 6: Prognostics & Health Management DARPA ESP
Session Chair: Dr Andrew Rosenberger - USAF AFRL/RXLM
7:30 AM - 8:00 AM
Engine System Prognosis (ESP) – A Transformational Capability for Life Management
Presenter: Dr James Larsen - USAF AFRL
Authors: Dr Michael Caton - USAF AFRL/RXLMN, Dr Leo Christodoulou - Defense Advanced Research Projects Agency, Dr Thomas Cruse - Private Consultant, Mr Robert Grelotti - Pratt & Whitney, Mr Edmund Hindle - GE Aviation, Mr Jay Jira - USAF AFRL/RXLMN, Mr Gregory Kacprzynski - Impact Technologies LLC, Dr Andrew Rosenberger - USAF AFRL/RXLM, Dr William Scheuren - Defense Advanced Research Projects Agency
8:00 AM - 8:30 AM
Cumulative Damage Modeling for Single Crystal Nickel-based Superalloy
Presenter: Dr Joseph Rigney - GE Aviation
8:30 AM - 9:00 AM
Application of a Visco Plastic Fatigue Model for Enhanced Life Accuracy
Presenter: Dr David Harmon - Pratt & Whitney
9:00 AM - 9:30 AM
Application of Near Real Time LCF Prognosis for Turboshaft Engines
Presenter: Mr Thomas Mooney - GE
7:30 AM to 9:30 AM
Concurrent Sessions
Wednesday, March 17, 2010
  Session 7: Mechanical Systems & Drives
Session Chair: Mr Vaughn Svendsen - USAF AFRL/RZTM
7:30 AM - 8:00 AM
Multi-fidelity Modeling for Predicting Helicopter Gearbox Life
Presenter: Dr Robert Tryon - VEXTEC
Author: Mr Ganapathi Krishnan - VEXTEC
8:00 AM - 8:30 AM
Advanced Oil Filter Load Monitoring for Aircraft Engine Bearing Diagnostics
Presenter: Mr Nathan Brown - Luna Innovations Inc
8:30 AM - 9:00 AM
3FAST – Fast Field Fluid Assessment Support Tools
Presenter: Mr Mitchell Shikowitz - Spectro Inc - QinetiQ North America
9:00 AM - 9:30 AM
Surface Wave Acoustic Microscopy for Rapid Nondestructive Evaluation (NDE) of Silicon Nitride Balls
Presenter: Dr Dan Xiang - Intelligent Automation Inc
Authors: Dr Fang Li - Intelligent Automation Inc, Dr Yexian Qian - Intelligent Automation Inc
9:30 AM to 10:00 AM 
Wednesday, March 17, 2010
  Break

10:00 AM to 11:00 AM
Concurrent Sessions
Wednesday, March 17, 2010
  Session 8: GUIDE IV
Session Chair: Dr Jeffrey Brown - USAF AFRL/RZTS
10:00 AM - 10:30 AM
Turbomachinery Aeroelastic Analysis Using the Proper Orthogonal Decomposition Method
Presenter: Dr Paul Cizmas - Texas A&M University
10:30 AM - 11:00 AM
Non-synchronous Vibrations and Aerodynamic Asymmetries in Turbomachinery Aeromechanics
Presenter: Dr Robert Kielb - Duke University
10:00 AM to 12:00 PM
Concurrent Sessions
Wednesday, March 17, 2010
  Session 9: Electrical Power Systems
Session Chair: Mr Nathan Kumbar - NAVAIR SYSCOM
10:00 AM - 10:30 AM
Tools for Health Management of Aircraft Power Systems
Presenter: Dr Steven Pekarek - Purdue University
Authors: Dr Steven Pekarek - Purdue University, Dr Eric Walters - PC Krause & Associates Inc
10:30 AM - 11:00 AM
Validating Wire Diagnostics/prognostics System Based on In-flight Tests
Presenter: Ms Meena Ganesh - General Electric Global Research
Author: Mr Jeffrey Slotnick - General Electric
11:00 AM - 11:30 AM
Applying Rank Order Statistics for Estimating the Differences of Degradation State among Aircraft Generators
Presenter: Mr Tsung-hsun Tsai - Global Strategic Solutions LLC
Authors: Mr Luis Hernandez - Global Strategic Solutions LLC, Mr Tsung-hsun Tsai - Global Strategic Solutions LLC
11:30 AM - 12:00 PM
Actuator Power Electronics Fault Prediction and Accommodation
Presenter: Dr Antonio Ginart - Impact Technologies LLC
Authors: Dr Michael Roemer - Impact Technologies, Mr Irfan Ali - Impact Technologies LLC, Dr Antonio Ginart - Impact Technologies LLC, Mr Patrick Kalgren - Impact Technologies LLC
10:00 AM to 12:00 PM
Concurrent Sessions
Wednesday, March 17, 2010
  Session 10: Prognostics & Health Management DARPA ESP
Session Chair: Dr Michael Caton - USAF AFRL/RXLMN
10:00 AM - 10:30 AM
Fusion of Vibration and On-line Oil Debris Sensors for Aircraft Engine Bearing Prognosis
Presenter: Dr Joseph Rigney - GE Aviation
Authors: Dr Neil Eklund - General Electric Global Research, Mrs Melinda Hirz - GE, Dr Hai Qiu - GE Global Research, Mr Taylor Rosenfeld - GE
10:30 AM - 11:00 AM
Crack Detection and Prognosis Using Non Contact Time of Arrival Sensors
Presenter: Mr Robert Morris - UTC-Pratt & Whitney
11:00 AM - 11:30 AM
Crack Detection and Prognosis Using Non Contact Time of Arrival Sensors for Rotors in Gas Turbine Engines
Presenter: Ms Lauren Gray - Pratt & Whitney
11:30 AM - 12:00 PM
Generic and Deployable Reasoning and Prognosis Technology
Presenter: Mr Gregory Kacprzynski - Impact Technologies LLC
Authors: Mr Liang Tang - Impact Technologies LLC, Mr Brian Walsh - Impact Technologies LLC
11:00 AM to 12:00 PM
Concurrent Sessions
Wednesday, March 17, 2010
  Session 8: Cold Section Durability
Session Chair: Dr Jeffrey Brown - USAF AFRL/RZTS
11:00 AM - 11:30 AM
Development of Aerodynamic Damping Sensitivity Coefficients for Geometrically Mistuned Bladed Assemblies
Presenter: Mr Kwen Hsu - Rolls-Royce
Authors: Dr Daniel Hoyniak - Rolls-Royce, Dr Kewn Hsu - Rolls-Royce
11:30 AM - 12:00 PM
A Study of Turbomachinery Vane Sector Mistuning
Presenter: Dr Peter Li - GE Aviation
Authors: Mr Andrew Blair - GE Aviation, Dr Sergio Filippi - GE Aviation
12:00 PM to 12:30 PM 
Wednesday, March 17, 2010
  Heavy Snacks - Champions Foyer

12:30 PM to 2:30 PM
Concurrent Sessions
Wednesday, March 17, 2010
  Session 11: Cold Section Durability
Session Chair: Mr Mark Klein - NAVAIR-4431
12:30 PM - 1:00 PM
Managing HCF Using SBIR Developed Vibration Testing and Analysis Technologies
Presenter: Dr Jerry Griffin - Blade Diagnostics Corp
1:00 PM - 1:30 PM
Maximum Amplification of Blade Response in Mistuned Multi Stage Assemblies
Presenter: Prof Marc Mignolet - Arizona State University
Authors: Mr Javier Avalos - Arizona State University, Prof Marc Mignolet - Arizona State University
1:30 PM - 2:00 PM
Structural Damping Identification for Blisks and Bladed Disks
Presenter: Mr Darren Holland - University of Michigan - Ann Arbor
Authors: Prof Steven Ceccio - University of Michigan - Ann Arbor, Prof Bogdan Epureanu - University of Michigan, Dr Sergio Filippi - GE Aviation, Mr Darren Holland - University of Michigan
2:00 PM - 2:30 PM
Rapid Evaluation of Mistuning Effects in Repaired IBRs Using the IES ROM Approaches
Presenter: Dr Dan Ghiocel - GP Technologies Inc
12:30 PM to 2:30 PM
Concurrent Sessions
Wednesday, March 17, 2010
  Session 12: Electrical Power Systems
Session Chair: Mr Nathan Kumbar - NAVAIR SYSCOM
12:30 PM - 1:00 PM
Wiring and Electrical Components Prognostics and Diagnostics
Presenter: Mr Treven Baker - Aviation Applied Technology Directorate
Author: Mr Kevin Cunningham - Bell Helicopter Co
1:00 PM - 1:30 PM
Addressing the Affordability and Reliability of Lithium Aircraft Batteries
Presenter: Mr Mark Hurley - NAVAIR SYSCOM
1:30 PM - 2:00 PM
Advanced Electrical Signature Analysis of Aircraft Electrical Generators
Presenter: Dr Freeman Rufus - Global Technology Connection Inc
Authors: Mr Sean Field - NAVAIR, Mr Nathan Kumbar - NAVAIR SYSCOM, Dr Ash Thakker - Global Technology Connection Inc
2:00 PM - 2:30 PM
E-2D Electrical Power Generating System
Presenter: Mr Jacque La Valle - NAVAIR
12:30 PM to 2:30 PM
Concurrent Sessions
Wednesday, March 17, 2010
  Session 13: Prognostics & Health Management
Session Chair: Mr Allen Jones - Aviation Applied Technology Directorate
12:30 PM - 1:00 PM
A Mission Analysis Software for Lifing of Fracture Critical Gas Turbine Engine Parts CANCELLED
Presenter: Dr Akhilesh Maewal - Honeywell Inc
Authors: Dr Ramesh Chandra - NAVAIR, Dr Akhilesh Maewal - Honeywell Inc, Dr Alan Pentz - NAVAIR
1:00 PM - 1:30 PM
Application of Design for Variation to Usage Based Lifing
Presenter: Mr Andrew Milliken - Pratt & Whitney
Author: Mr Grant Reinman - Pratt & Whitney
1:30 PM - 2:00 PM
Propulsion System Diagnostic, Prognostic and Health Management OSST Demonstration & Results
Presenter: Mr Andrew Stramiello - Honeywell Aerospace
2:00 PM - 2:30 PM
Ceramic Thermocouples for Component Temperature Measurement in Propulsion Systems
Presenter: Dr Jeffrey Brogan - MesoScribe Technologies Inc
Authors: Mr Richard Gambino - MesoScribe Technologies Inc, Dr Otto Gregory - University of Rhode Island, Mr Jonathan Gutleber - MesoScribe Technologies Inc, Dr Jason Trelewicz - MesoScribe Technologies Inc, Mr Vincent Wnuk - Hitec Products Inc
Thursday, March 18, 2010
7:00 AM to 12:00 PM 
Thursday, March 18, 2010
  Registration
7:00 AM - 7:30 AM
Continental Breakfast
7:30 AM to 9:30 AM
Concurrent Sessions
Thursday, March 18, 2010
  Session 14: Hot Section Durability
Session Chair: Dr Richard Anthony - USAF AFRL/RZTT
7:30 AM - 8:00 AM
Advanced Turbine Life Prediction System
Presenter: Dr Balkrishna Annigeri - United Technologies Corporation
Authors: Dr Balkrishna Annigeri - United Technologies Corporation, Mr Michael Marotta - Infotech Aerospace Services
8:00 AM - 8:30 AM
Life Prediction of Components Under General Thermal and Mechanical Loading
Presenter: Dr Thomas Cook - Rolls-Royce
Authors: Dr Martin Bache - Swansea University, Mr Jason Baker - Rolls-Royce, Dr John Matlik - Rolls-Royce, Dr Lynn Powers - Rolls-Royce, Mr Bradley Robinson - Rolls-Royce
8:30 AM - 9:00 AM
Concepts & Rational of Operational Thermal Transients Affecting Turbine Durability
Presenter: Mr Lewis Schmidt - NAVAIR
9:00 AM - 9:30 AM
High Transient Fiber Optic Turbine Sensing System Development
Presenter: Mr Matthew Davis - Luna Innovations Incorporated
Author: Mr Matthew Palmer - Luna Innovations Inc
7:30 AM to 9:30 AM
Concurrent Sessions
Thursday, March 18, 2010
  Session 15: Fleet Management Practices
Session Chair: Mr Richard Sabo - NAVAIR SYSCOM
7:30 AM - 8:00 AM
Engine Life Development Process
Presenter: Mr Wilson Taylor - Inovative Technologies Corporation
8:00 AM - 8:30 AM
Retirement for Cause Approach for Part Management
Presenter: Mr Lloyd Matson - USAF ASC/EN
8:30 AM - 9:00 AM
Application of Probabilistic Methods to Turbine Engine Disk Life Prediction and Risk Assessment
Presenter: Dr Paul Copp - Wright State University
Author: Dr Tarun Goswami - Wright State University
9:00 AM - 9:30 AM
Comparison of Turbine Engine Component Lifing Methods
Presenter: Dr Paul Copp - Wright State University
7:30 AM to 9:30 AM
Concurrent Sessions
Thursday, March 18, 2010
  Session 16: Materials and Manufacturing
Session Chair: Ms Monica Poelking - USAF AFRL/RXL
7:30 AM - 8:00 AM
Automated Tools for Fracture Mechanics Life Prediction and Reliability
Presenter: Dr Robert McClung - SwRI
Authors: Dr Michael Enright - SwRI, Mr Simeon Fitch - Mustard Seed Software, Dr Yi-der Lee - SwRI, Dr Wuwei Liang - SwRI, Dr Robert McClung - SwRI
8:00 AM - 8:30 AM
Probabilistic Treatment of Engine Materials with Multiple Types of Anomalies
Presenter: Dr Michael Enright - SwRI
Authors: Dr Michael Enright - SwRI, Dr R. Craig McClung - SwRI
8:30 AM - 9:00 AM
Influence of Surface Condition on Fatigue Variability in Ti-6Al-4V
Presenter: Dr Patrick Golden - USAF AFRL
Authors: Dr Patrick Golden - USAF AFRL, Dr Reji John - USAF AFRL, Dr W. John Porter - UDRI
9:00 AM - 9:30 AM
Incorporating Surface Residual Stress Effects in Probabilistic Fatigue Life Prediction
Presenter: Dr Sushant Jha - Universal Technology Corp
Authors: Dr Reji John - USAF AFRL, Dr James Larsen - USAF AFRL
9:30 AM to 10:00 AM 
Thursday, March 18, 2010
  Break

10:00 AM to 12:00 PM
Concurrent Sessions
Thursday, March 18, 2010
  Session 17: Hot Section Durability
Session Chair: Dr Richard Anthony - USAF AFRL/RZTT
10:00 AM - 10:30 AM
Rotor TMF Testing – Current Sate of the Art
Presenter: Mr H Eric Sonnichsen - Test Devices Inc
10:30 AM - 11:00 AM
Cooling Effectiveness Testing to Improve Durability in Advanced Engines
Presenter: Mr James Loebig - Rolls-Royce North American Technologies
11:00 AM - 11:30 AM
Automated Detection of Cooling Hole and Channel Blockage
Presenter: Dr Steven Shepard - Thermal Wave Imaging Corp
Authors: Mr Bharat Chaudhry - Thermal Wave Imaging Corp, Dr James Lhota - Thermal Wave Imaging Inc, Dr Steven Shepard - Thermal Wave Imaging Corp
11:30 AM - 12:00 PM
Creep-Fatigue Crack Growth Under Constrained Loading of Thin Sheet Combustor Alloys
Presenter: Dr Thomas Cook - Rolls-Royce
Authors: Dr Martin Bache - Swansea University, Dr Richard Johnston - Swansea University, Dr John Matlik - Rolls-Royce, Mr Bradley Robinson - Rolls-Royce
10:00 AM to 12:00 PM
Concurrent Sessions
Thursday, March 18, 2010
  Session 18: Fleet Management Practices
Session Chair: Mr Richard Sabo - NAVAIR SYSCOM
10:00 AM - 10:30 AM
High Cycle Fatigue Effects in Probabilistic Risk Assessment of Gas Turbine Engine Components
Presenter: Dr Ramesh Chandra - NAVAIR
Authors: Dr Kwai Chan - SwRI, Dr Ramesh Chandra - NAVAIR, Dr Michael Enright - SwRI, Dr Patrick Golden - USAF AFRL, Dr Alan Pentz - NAVAIR
10:30 AM - 11:00 AM
Fleetwide Analysis of Propulsion System Stability and Robustness
Presenter: Dr Michael Roemer - Impact Technologies LLC
Author: Mr Glen Karlsons - NAVAIR
11:00 AM - 11:30 AM
A Different Approach to Implementing CBM+
Presenter: Dr Richard Millar - Naval Postgraduate School
Author: Dr Richard Millar - Naval Postgraduate School
11:30 AM - 12:00 PM
CBM+ Research Environment
Presenter: Ms Kelly Navarra - USAF AFRL
Authors: Mr Robert Lawton - General Dynamics Information Technology (GDIT), Ms Kelly Navarra - USAF AFRL/RZTS
10:00 AM to 12:00 PM
Concurrent Sessions
Thursday, March 18, 2010
  Session 19: Materials and Manufacturing
Session Chair: Ms Monica Poelking - USAF AFRL/RXL
10:00 AM - 10:30 AM
Domestic SiNC and Stoichiometric-SiC Structural Ceramic Fibers for Turbine CMCs
Presenter: Dr Edward Pope - MATECH Global Strategic Materials
Authors: Mr Nick Brabham - MATECH Global Strategic Materials, Mr David Harris - MATECH Global Strategic Materials, Dr Christopher Hill - MATECH Global Strategic Materials, Mr Jerry King - MATECH Global Strategic Materials, Mr Bernie Morkunas - MATECH Global Strategic Materials, Miss Tam Pham - MATECH Global Strategic Materials, Dr Edward Pope - MATECH Global Strategic Materials, Mr Joseph Rose - MATECH Global Strategic Materials
10:30 AM - 11:00 AM
NDE Equipment Solutions for Aircraft Inspection
Presenter: Mr Scott Reome - Florida Turbine Technologies Inc
Authors: Mr John Appleby - Florida Turbine Technologies Inc, Mr Paul Zombo - Siemens Energy
11:00 AM - 11:30 AM
Ultrasonic Non-destructive Evaluation of Residual Life of Fatigue-Accumulating Components
Presenter: Dr Robert Lacovara - Luna Innovations Inc
Authors: Mr Brian Reinhardt - Pennsyvania State University, Dr Bernhard Tittman - Pennsyvania State University
11:30 AM - 12:00 PM
Computational Design Tool for Surface Treatment Process Development
Presenter: Dr Adrian DeWald - Hill Engineering LLC
12:00 PM to 12:30 PM 
Thursday, March 18, 2010
  Heavy Snacks - Champions Foyer

12:30 PM to 2:30 PM
Concurrent Sessions
Thursday, March 18, 2010
  Session 20: Hot Section Durability
Session Chair: Dr Richard Anthony - USAF AFRL/RZTT
12:30 PM - 1:00 PM
Damper Verification Using Spin Rig Testing
Presenter: Mr Alan Stoner - Pratt & Whitney
1:00 PM - 1:30 PM
Damping Coatings for High Temperature Application
Presenter: Mr John Delvaux - GE Energy
1:30 PM - 2:00 PM
Plasma Sprayed Ceramic Coatings for Elevated Temperature Damping
Presenter: Dr Robert Willson - APS Materials Inc
2:00 PM - 2:30 PM
High Temperature Cyclic Creep, Placticity, and TMF of a Single-crystal Superalloy Application to Turbine Airfoils
Presenter: Dr Alexander Staroselsky - Pratt & Whitney
Authors: Dr Brice Cassenti - University of Connecticut, Dr Venkat Seetharaman - Pratt & Whitney, Dr Alexander Staroselsky - Pratt & Whitney
12:30 PM to 2:30 PM
Concurrent Sessions
Thursday, March 18, 2010
  Session 21: Fleet Management Practices
Session Chair: Mr Richard Sabo - NAVAIR SYSCOM
12:30 PM - 1:00 PM
Low Plasticity Burnishing (LPB) as an MRO Technology to Improve Compoenent Life, Damage Tolerance, Performance and Safety
Presenter: Dr Narayanan Jayaraman - Lambda Technologies Group
Authors: Mr Douglas Hornbach - Lambda Technologies Group, Mr Paul Prevey - Lambda Technologies Group
1:00 PM - 1:30 PM
Advanced Reliability Analysis for Military Aviation Data Warehouse
Presenter: Dr David Bryg - Scientific Monitoring Inc
Authors: Dr Link Jaw - Scientific Monitoring Inc, Dr Richard Millar - Naval Postgraduate School
1:30 PM - 2:00 PM
Benefits of Continuously Recorded Aircraft and Engine Data
Presenter: Mr Brian Boyer - Rolls-Royce
Author: Mr Brian Boyer - Rolls-Royce
2:00 PM - 2:30 PM
Data Acquisition and Management to Support Aircraft Subsystem Lifing
Presenter: Dr Kirby Keller - The Boeing Co
Author: Mr C Bruce Wood - Pratt & Whitney
12:30 PM to 2:30 PM
Concurrent Sessions
Thursday, March 18, 2010
  Session 22: Materials and Manufacturing
Session Chair: Ms Monica Poelking - USAF AFRL/RXL
12:30 PM - 1:00 PM
Advanced Coatings for Aircraft Component Durability
Presenter: Dr Derek Hass - Directed Vapor Technologies International
1:00 PM - 1:30 PM
IBR/Blisk Repair by LENS Material Build-Up
Presenter: Dr Richard Grylls - Optomec Inc
Author: Dr Richard Grylls - Optomec Inc
1:30 PM - 2:00 PM
Methods for Blisk/IBR Blade Reconstructive Repair
Presenter: Mr Raymond Walker - Keystone Synergistic Enterprises Inc
Author: Mr Bryant Walker - Keystone Synergistic Enterprises Inc
2:00 PM - 2:30 PM
Small Turbine Testing: Effective Means to Evaluate New Design Technologies and Replicate Failure in Fielded Components
Presenter: Dr Robert Tryon - VEXTEC
Author: Dr Robert Tryon - VEXTEC
X CLOSE WINDOW